Port Qos (Basic); Fc Port Qos - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.7 Host-LU QoS
5.7.7

Port QoS (Basic)

Follow the message in the Information area to configure a bandwidth limit on each port.
5.7.8

FC Port QoS

This function displays the bandwidth limit and the performance information of the FC ports that are registered
in the ETERNUS DX/AF.
• The ports with "CA" or "CA/RA" as the port mode that are registered by the ETERNUS DX/AF are displayed
regardless of whether the ports belong to CA port groups or not.
• This function displays the performance information that is obtained during performance monitoring
regardless of whether the QoS mode is enabled or disabled. When the performance information is
displayed before stopping performance monitoring, the performance information that is obtained from
the start time until the time when displaying the performance information is requested is displayed. This
function displays the performance information of each port.
284
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0