Host-Lu Qos Performance Information - Fujitsu ETERNUS DX60 S3 User Manual

Disk storage systems, all-flash arrays
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 5 Connectivity Status
5.7 Host-LU QoS
5.7.1

Host-LU QoS Performance Information

When a host affinity setting with a specific host group is already configured, the total performance
information for the host and the performance information of each LUN are displayed.
If a host affinity setting with all of the host groups is configured ("All" is specified as the target host group),
the performance information of each host LUN is displayed.
The monitoring status of the performance information and obtained performance information are cleared in
the following conditions:
The port mode is changed (CA, CA/RA  RA or Initiator)
The ETERNUS DX/AF is rebooted
An error is detected in the ETERNUS DX/AF
Hot maintenance of the CM is performed
Hot controller firmware upgrade is performed
The following items are displayed in the Main area:
Host - CA Port - LUN Group Information
Host : Bandwidth Limit
The host name and the bandwidth limit of the selected host is displayed in "Host : Bandwidth Limit"
format.
If the bandwidth limit has not been configured (the bandwidth has not been limited), "Unlimited" is
displayed as the "Bandwidth Limit". If "All" has been selected for the host, a "-" (hyphen) is displayed as the
"Bandwidth Limit".
Host Group
The host group name, to which the selected host belongs, is displayed.
If all of the hosts are to be connected, "All" is displayed.
If the host does not belong to a host group, a "-" (hyphen) is displayed.
275
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
P2X0-1260-19ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents