Fujitsu ETERNUS DX60 S3 User Manual page 395

Chapter 8 Advanced Copy Status
8.8 Advanced Copy (Property)
• Destination Volume Name
The following is displayed depending on the "Direction". If the status is "
displayed.
- When the "Direction" is "From Local/To Remote"
The "Remote Box ID / Copy destination volume number" is displayed.
- When the "Direction" is "From Remote/To Local"
The copy destination volume name is displayed.
• Copy Range
The copy range of the copy session is displayed. If the status is "
- Totally
Whole volume
- Extent
Part of volume
• Secondary Access Permission
If the status is "
status is "
- Read Only at Equivalency
When the "Phase" is "Equivalent", only read access to the copy destination volume is allowed
- No Read/Write
No read/write access to the copy destination volume is allowed
• Sync
The operation mode of the copy session is displayed. If the status is "
played.
- Sync (synchronous)
- Async (asynchronous)
• Transfer Mode
The transfer mode of the copy session is displayed. If the "Status" is "
played. If the "Sync" is "Sync", a "-" (hyphen) is displayed.
- Stack Mode (Asynchronous Stack mode)
- Consistency Mode (Asynchronous Consistency mode)
- Through Mode (Asynchronous Through mode)
• Recovery Mode
The recovery mode of the copy session is displayed. If the status is "
played.
- Automatic Recovery
In this mode, copy automatically resumes when the copy path is recovered from error status.
- Manual Recovery
In this mode, copy does not automatically resume when the copy path is recovered from error status.
Active", accessibility from the host to the copy destination volume is displayed. If the
Reserved", a "-" (hyphen) is displayed.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Reserved", a "-" (hyphen) is displayed.
395
Reserved", a "-" (hyphen) is
Reserved", a "-" (hyphen) is dis-
Reserved", a "-" (hyphen) is dis-
Reserved", a "-" (hyphen) is dis-
P2X0-1260-19ENZ0