Snapopc - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 8 Advanced Copy Status
8.2 Advanced Copy (All Local Sessions)
Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361)
this section.
8.2.4

SnapOPC

This function displays detailed information for SnapOPC sessions.
The following items are displayed in the Main area:
• SDP No.
The Snap Data Pool number, which is used when the copy destination SDV capacity is insufficient, is
displayed. If the status is "
displayed.
• SDP Used Capacity
The used capacity of Snap Data Pool is displayed. If the status is "
tion is not an SDP, a "-" (hyphen) is displayed.
Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361)
this section.
Reserved" or when the copy destination is not an SDP, a "-" (hyphen) is
366
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for the display items that are not described in
Reserved" or when the copy destina-
for the display items that are not described in
P2X0-1260-19ENZ0