Fujitsu ETERNUS DX60 S3 User Manual page 155

Chapter 3 Component Status
3.15 Drive Enclosure Detail
• Type
The drive type is displayed.
- Online
SAS disks
- Online AF
Advanced Format supported SAS disks
- Nearline
Nearline SAS disks
- Nearline AF
Advanced Format supported Nearline SAS disks
- SSD-M
SSD-Ms (12 Gbit/s) (*1)
- SSD-L
SSD-Ls (12 Gbit/s) (*1)
- SSD
SSDs (6 Gbit/s) (*1)
- Online SED
Online SEDs
- Nearline SED
Nearline SEDs
- SSD-M SED
SSD-M SEDs (*2)
- SSD-L SED
SSD-L SEDs (*2)
*1: The displayed item varies depending on the interface speed (bandwidth) or the capacity of the reserved space.
Unless otherwise specified, this manual refers to "SSD-M", "SSD-L", and "SSD" collectively as "SSD".
*2: In this manual, there may be cases when "SSD SED" is used as a collective term for options and drive types.
• Usage
The usage of the drive is displayed.
- For a drive that is used for user data or an unused drive
Data
- For a drive that is registered as a Global Hot Spare
Global Hot Spare
- For a drive that is registered as a Dedicated Hot Spare
Dedicated Hot Spare
• RAID Group
When the drive belongs to a RAID group, the RAID group number and the RAID group name are displayed.
However, if the drive usage is "Dedicated Hot Spare", the RAID group number and the RAID group name are
displayed even when the drive is not used as a Hot Spare. Click this item to display the [RAID Group Detail]
screen.
When the usage is not "Dedicated Hot Spare" and the drive is not registered in a RAID group, a "-" (hyphen)
is displayed.
• Health
The drive lifetime information is displayed between 0% - 100%. As the lifetime of the drive is reduced, the
health level of the drive is decreased.
A "-" (hyphen) is displayed in the following conditions:
- The drive is neither "SSD" nor "SSD SED"
- The lifetime information cannot be obtained
155
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0