Flexible Tier Sub Pool Detail (Basic) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 7 Thin Provisioning Pool Status
7.2 Flexible Tier Pools
• Allocation
The allocation method for the volume is displayed.
- Thin
Physical area is allocated to the target area of the volume when a write I/O is received.
- Thick
Physical area is allocated to the whole area of the volume when volumes are created.
• Capacity
The total volume capacity is displayed.
• Used Capacity
The used capacity (physically allocated capacity) of volume is displayed.
• Used Rate
The volume utilization is displayed.
Used Rate = Used Capacity / Capacity
• Threshold
The threshold for monitoring the volume utilization is displayed.
If the "Used Rate" value exceeds the "Threshold", a Host Sense Key Code Qualifier is reported.
7.2.5

Flexible Tier Sub Pool Detail (Basic)

Click the [No.] link or the [Name] link on the
346) to display the corresponding Flexible Tier Sub Pool Detail screen.
Click the [Basic] tab on the [Flexible Tier Sub Pool Detail] screen to display the basic information of the
corresponding FTSP.
The following items are displayed in the Main area:
• Status
The FTSP status is displayed. Refer to
information of FTSP status.
"7.2.3 Flexible Tier Pool Detail (Flexible Tier Sub Pool)" (page
"A.4 Thin Provisioning Pool Status" (page 409)
349
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for detailed
P2X0-1260-19ENZ0