Fujitsu ETERNUS DX60 S3 User Manual page 113

Chapter 3 Component Status
3.5 Drives
• Type
The drive type is displayed.
- 2.5" Online
2.5-inch SAS disk
- 2.5" Online AF
2.5-inch SAS disk (Advanced Format supported)
- 2.5" Nearline
2.5-inch Nearline SAS disk
- 2.5" Nearline AF
2.5-inch Nearline SAS disk (Advanced Format supported)
- 3.5" Online
3.5-inch SAS disk
- 3.5" Online AF
3.5-inch SAS disk (Advanced Format supported)
- 3.5" Nearline
3.5-inch Nearline SAS disk
- 3.5" Nearline AF
3.5-inch Nearline SAS disk (Advanced Format supported)
- 2.5" SSD-M
2.5-inch SSD-M (12 Gbit/s) (*1)
- 3.5" SSD-M
3.5-inch SSD-M (12 Gbit/s) (*1)
- 2.5" SSD-L
2.5-inch SSD-L (12 Gbit/s) (*1)
- 3.5" SSD-L
3.5-inch SSD-L (12 Gbit/s) (*1)
- 2.5" SSD
2.5-inch SSD (6 Gbit/s) (*1)
- 3.5" SSD
3.5-inch SSD (6 Gbit/s) (*1)
- 2.5" Online SED
2.5-inch Online SED
- 3.5" Nearline SED
3.5-inch Nearline SED
- 2.5" SSD-M SED
2.5-inch SSD-M SED (*2)
- 3.5" SSD-M SED
3.5-inch SSD-M SED (*2)
- 2.5" SSD-L SED
2.5-inch SSD-L SED (*2)
- 3.5" SSD-L SED
3.5-inch SSD-L SED (*2)
*1: The displayed item varies depending on the interface speed (bandwidth) or the capacity of the reserved space.
•
"SSD-M" is displayed for SSDs with an interface speed of 12Gbit/s.
•
"SSD-L" is displayed for Value SSDs with an interface speed of 12Gbit/s.
•
"SSD" is displayed for SSDs with an interface speed of 6Gbit/s.
Unless otherwise specified, this manual refers to "SSD-M", "SSD-L", and "SSD" collectively as "SSD".
*2: In this manual, there may be cases when "SSD SED" is used as a collective term for options and drive types.
113
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0