Flexible Tier Pool Detail (Volume) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 7 Thin Provisioning Pool Status
7.2 Flexible Tier Pools
7.2.4

Flexible Tier Pool Detail (Volume)

Click the [No.] link or the [Name] link on the
Flexible Tier Pool Details screen.
Click the [Volume] tab on the [Flexible Tier Pool Detail] screen to display a list of volumes that are registered
in the corresponding FTRP. When no volumes are registered in the FTRP, only the item name is displayed.
The following items are displayed in the Main area:
• No.
The volume number is displayed.
• Name
The volume name is displayed.
• Status
The volume status is displayed. Refer to
status.
• Type
The volume type is displayed.
This volume list displays only the volumes whose type is "FTV".
• Usage
The usage of the volume is displayed.
- Block
The volumes that are used for the SAN.
- File
The volumes that are used for the NAS.
- System
The volumes that are used for management information.
Refer to
• FTSP Priority
The FTSP number, to which a volume is assigned on a priority basis in the FTRP, is displayed. When the
setting is omitted, "-" (hyphen) is displayed.
"Usage Details" (page 228)
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"7.2 Flexible Tier Pools" (page 340)
"A.2 Volume Status" (page 406)
in "4.11 Volume Detail (Basic)" (page 223)
348
to display the corresponding
for detailed information of volume
for details.
P2X0-1260-19ENZ0