Fujitsu ETERNUS DX60 S3 User Manual page 154

Chapter 3 Component Status
3.15 Drive Enclosure Detail
●
For 3.5" high density DEs
The following items are displayed in the Main area:
• Storage system image
The front view of the DEs that are installed in the ETERNUS DX/AF is displayed. The number of drives that
can be installed for each DE type is as follows:
- 2.5" DEs
24 drives (24drives are lined up horizontally)
- 3.5" DEs
12 drives (3 drives are lined up vertically and 4 drives are lined up horizontally)
- 3.5" high density DEs
60 drives (5 drives are lined up vertically and 12 drives are lined up horizontally)
- When no drives are installed
Blank
The drive status is displayed with an icon. Refer to
By clicking this item, the [Drives] screen is displayed. Refer to
• Parts
The drive number is displayed.
By clicking this item, the [Drives] screen is displayed. Refer to
• Status
The drive status is displayed. Refer to
• Capacity
The capacity of the drive is displayed.
The drive capacity that is displayed for the SSD-L differs from the product's actual capacity. For example,
the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB".
• Speed
The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed.
- 15000 rpm
- 10000 rpm
- 7200 rpm
"A.5 Component Status" (page 410)
154
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"A.5 Component Status" (page 410)
"3.19 Drive Detail" (page 164)
"3.19 Drive Detail" (page 164)
for details.
for details.
for details.
for details.
P2X0-1260-19ENZ0