Fujitsu ETERNUS DX60 S3 User Manual page 72

Chapter 2 System Status
2.12 System Settings
• SMI-S
The current SMI-S setting is displayed.
- Enable
- Disable
When enabling or disabling of the SMI-S is being performed, the [Setup SMI-S Environment] action
cannot be clicked.
• SMI-S Performance Information
The setting status for the SMI-S performance information response is displayed.
- Enable
- Disable
• SED Authentication Key
Whether the SED authentication key has been "Registered" or "Not Registered" is displayed.
• Disk Drive Patrol
Whether the Disk Drive Patrol function is enabled or disabled is displayed.
• Extreme Cache Mode
The selected Extreme Cache (EXC) mode is displayed.
For the ETERNUS DX60 S3, the ETERNUS DX8100 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F,
this item is not displayed.
- Extreme Cache
- Extreme Cache Pool
- Not Used
• Extreme Cache Memory Size
The specified capacity (GB) of the EXC is displayed.
A "-" (hyphen) is displayed when the Extreme Cache mode is "Not Used".
For the ETERNUS DX60 S3, the ETERNUS DX8100 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F,
this item is not displayed.
The following Extreme Cache memory size is displayed according to the Extreme Cache mode.
ETERNUS DX100 S3/DX200 S3
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8700 S3/DX8900 S3
Model
N/A
The specified EXC memory size in
the ETERNUS DX
The total value of the EXC memory
size for each CM
72
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Extreme Cache Mode
Extreme Cache (EXC) Extreme Cache Pool (EXCP)
The total value of the EXCP
memory size for each CM
P2X0-1260-19ENZ0