Fujitsu ETERNUS DX60 S3 User Manual page 354

Disk storage systems, all-flash arrays
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 7 Thin Provisioning Pool Status
7.2 Flexible Tier Pools
Fast Recovery Drive
When the hot spare area in the Fast Recovery RAID group is used, the drive number for the data recovery
source drive is displayed. If Fast Recovery (*1) is not used, the field is blank.
This item is displayed only when the RAID level is "High Reliability (RAID6-FR)".
*1:
High-speed rebuilding when one drive fails in the Fast Recovery RAID group.
CE Drive#yy (for the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F)
DE#xx Drive#yy (xx: DE number, yy: Drive number)
Process
A process that is being performed is displayed. If no process is being performed, a "-" (hyphen) is dis-
played.
Progress
The progress of a process that is being performed is displayed with a bar and a rate (%). To display the lat-
est progress, refresh the screen. If no process is being performed, a "-" (hyphen) is displayed.
Stripe Depth
The Stripe Depth (*1) of the RAID group is displayed.
If the RAID level is "Mirroring (RAID1)", a "-" (hyphen) is displayed.
-
64 KB
-
128 KB
-
256 KB
-
512 KB
-
1024 KB
*1:
The number of logical blocks that are assigned to a drive for each stripe when configuring a stripe volume in a
RAID group. Normally, it is 64KB.
Deleting
The RAID group deletion status is displayed.
If a RAID group deletion process is not being performed, a "-" (hyphen) is displayed.
-
Executing
A RAID group deletion process is being performed or a data migration related to the deletion process is
being performed.
-
Error
Deletion of the RAID group failed.
354
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
P2X0-1260-19ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents