Fujitsu ETERNUS DX60 S3 User Manual page 255

Chapter 5 Connectivity Status
5.2 Host Group
• Host Response
The host response that is assigned to the SAS host or to the host group of the SAS host is displayed.
• Status
Whether the host affinity setting is applied to the SAS host is displayed.
- Active
The host affinity setting is applied to the SAS host. The LUN group can be accessed from the SAS host.
- Inactive
The host affinity setting is not applied to the SAS host.
Filter setting
Filter
Name
SAS Address
Host Group
CA Port Group
CA Port
Host Response
Status
Input the SAS host name that is to be displayed.
When not using the name for filtering, leave this item blank.
Input the SAS address for the SAS host that is to be displayed.
When not using the SAS address for filtering, leave this item blank.
Input the name of the host group to which the SAS host that is to be displayed belongs.
When not using the host group for filtering, leave this item blank.
Input the name of the CA port group that has the host affinity setting with the SAS host
that is to be displayed.
When not using the CA port group for filtering, leave this item blank.
Select the CA port that has the host affinity setting with the SAS host that is to be dis-
played.
Select the name of the host response that is assigned to the SAS host that is to be
displayed.
Select the set state of the host affinity for the SAS host that is to be displayed.
255
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
P2X0-1260-19ENZ0