Appendix A Status List
A.1 Storage System General Status
Storage System General Status (Detail)
The general status of the ETERNUS DX/AF (detail) is displayed with an icon and character string, or only
The meaning of ETERNUS DX/AF general status (detail) is described below.
Device general status (detail)
Change Controlling CM
Not Ready (*)
Device general status
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
The ETERNUS DX/AF is in the normal state.
Components that are undergoing maintenance
exist in the ETERNUS DX/AF.
Rebuild or copyback is being performed.
Changing of the Controlling CM is required.
Pinned data is detected.
A component requires preventive maintenance.
A bad sector is detected.
A component has an error.
A failure is detected when starting or turning off
the ETERNUS DX/AF. I/O from the host cannot be
*: The number, which indicates the factor of being
"Not Ready", is displayed.
The ETERNUS DX/AF is in failed status. I/O from the
host cannot be received normally.
A status other than the ones listed above.