Chapter 2 System Status
2.10 Storage Migration
•
Start Time
•
End Time
The start and end times of data migration are displayed.
This item is displayed only when the previous screen is the [Storage Migration] screen.
-
YYYY-MM-DD hh:mm:ss (YYYY: Year (AD), MM: Month (01 - 12), DD: Date (01 - 31), hh: Hour (00 - 23),
mm: Minute (00 - 59), ss: Second (00 - 59))
The start and end times are displayed as shown below depending on the migration status.
Migration status
Initial
Waiting
Running
Normal End
Suspend
Stop
Error (xxx)
•
When Storage Migration is restarted when its migration status is "Suspend" or "Error", data migration
restarts from the point of suspension. In this case, the start time is not changed.
•
When Storage Migration is restarted when its migration status is "Stop", data migration of the LUN is
started over from scratch. The start time is changed to the migration restart time.
•
Error Location
The storage system in which a data migration error occurs is displayed.
If no error is occurred, a "-" (hyphen) is displayed.
This item is displayed only when the previous screen is the [Storage Migration] screen.
-
Source
Migration source storage system
-
Destination
Local (migration destination) storage system
•
Result
When the source LUN and destination volume are in normal status, the "Result" field is blank.
An error message is displayed when an error is detected in the source LUN or destination volume.
This item is displayed only when the previous screen is the [Start Storage Migration] screen.
Start time
The start time is not displayed.
The migration start time is displayed.
69
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
End time
Blank
The migration end time is displayed.
The time when migration suspends is displayed.
The time when migration stops is displayed.
The time when migration stops due to error is
displayed.
P2X0-1260-19ENZ0