Fujitsu ETERNUS DX60 S3 User Manual page 40

Chapter 2 System Status
2.1 System (Basic Information)
• Lock
If a logged in user is updating data that is managed by the ETERNUS DX/AF, "Yes" is displayed. If a user is
not updating data, "No" is displayed. When "Yes" is displayed for a user, other users with "No" displayed
cannot update data.
Note that multiple users cannot update data that is managed by the ETERNUS DX/AF at the same time. The
storage system is exclusively used by a user who is updating the data. The exclusion is released when the
updating is complete.
• IP Address
The IP address for a user who is logged in is displayed. If an AIS Connect server is used to log in, "AIS Con-
nect Server" is displayed. When the interface is "SOFT" (SMI-S or DLM), a "-" (hyphen) is displayed. A "-"
(hyphen) is also displayed for internal process sessions of ETERNUS Web GUI in a Unified Storage environ-
ment.
- For IPv4 address
• xxx.xxx.xxx.xxx
xxx: 0 - 255 (decimal)
- For IPv6 address
• xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to "IPv6 Address Notation" (page 253)
40
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
P2X0-1260-19ENZ0