Controller Enclosure - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 3 Component Status

3.2 Controller Enclosure

3.2 Controller Enclosure
The Controller Enclosure (CE) information is displayed.
This function is displayed for the ETERNUS DX8700 S3/DX8900 S3.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3,
the ETERNUS AF250/AF650, and the ETERNUS DX200F, clicking "Controller Enclosure" in the category displays
the [Controller Enclosure Detail] screen. Refer to
The following items are displayed in the Main area:
• Enclosure
The CE number is displayed. By clicking this item, the [Controller Enclosure Detail] screen is displayed.
Refer to "3.6 Controller Enclosure Detail" (page 117)
• Status
The CE status is displayed. Refer to
• Charge Rate
The battery charge level for CE is displayed.
When the battery charge level is 90% or more, "Full Charge" is displayed. When the battery charge level is
less than 90%, "xx%" is displayed.
• Cache Mode
The current status and the factor of the cache are displayed. The normal status is "Write Back Mode".
Refer to "Cache Mode" (page 26)
- Write Back Mode
- Write Through (Pinned Data)
- Write Through (Battery)
- Write Through (Maintenance)
- Write Through (1CM)
"3.6 Controller Enclosure Detail" (page 117)
"A.5 Component Status" (page 410)
in "1.1 Overview"
81
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for display items.
for details.
for details.
for details.
P2X0-1260-19ENZ0