Skill Level
This conversion kit for the Bruder Vovlo A60H is recommended to users with medium and above
competence.
The following instructions are deemed a guide to "how to do the conversion" not a concise step by
step procedure.
Caution Note
•
Carefully read and fully understand the instructions before commencing assembly. A
supervising adult should also read and understand the instructions if a child assembles the
model.
•
When assembling this kit, tools including knives and heat gun are used. Extra care should
always be taken to avoid personal injury and damage to the kit.
•
All instructions relating to tools, glues, etc (not included in the kit) must be adhered to at all
times.
•
Keep out of reach of small children. Kit contains small parts and plastic bags which are
harmful to children if swallowed.
Recommended Tools
•
Philips screw driver
•
Allen keys
•
Hex socket
•
HSS drill bits 2mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 10mm
•
File
•
Pliers
•
Soldering Iron
•
Side cutters
•
Hot glue gun
•
Knife
•
G clamp (for pushing motors into 3D printed parts)
Parts not included in kit
•
Servo double horn (60mm)
•
Servo rod/stiff wire
•
Heat shrink
•
Glue
Version 1
Page 3
28/09/20