Setting The D Channel Monitor Automatic Start - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
For more information on the monitor functions, see
Chapter 7.
To display the START TIME screen:
In the GENERAL SETUP menu, select START TIME.

Setting the D Channel Monitor automatic start

•
•
•
•
5 - 28
You can activate or deactivate the automatic start.
To do this, move the cursor to AUTO START and
press the LEFT and RIGHT arrow keys to display
ON to activate, or OFF to deactivate.
When AUTO START is ON, highlight START TIME
to make it available for editing. The cursor appears
at the start of the editable value. Press a valid
number key to overwrite the character highlighted
by the cursor.
If you press the LEFT arrow key, the cursor goes
back to the beginning of the editable value.
Press the UP and DOWN arrow keys to set the start
time.
Press F6—EXIT to save the AUTO START as ON or
OFF, with the currently displayed start time, and
return to the GENERAL SETUP menu.
428856