Connecting Aurora Duet At The S/T Interface; Duet At The U Interface; Telecommunications Safety - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide

Telecommunications safety

3 - 10
Connecting aurora Duet
Connecting aurora Duet
When connected to the 'U' Interface in this way aurora
can be used to monitor and simulate on either LT or TE
mode without having to alter the connections.
The connectors on your aurora
safety status classification SELV (where SELV = Safety
Extra Low Voltage).
Connections with other equipment should be made such
that the equipment continues to comply with clause 2.3
of EN60950 for SELV circuits after a connection is made.
at the S/T interface
at the U interface
conform to EN41003
Duet
Duet
428856