Full Channel Test Screen; Setting Up The Full Channel Test - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide

FULL CHANNEL TEST screen

This screen allows you to set up and perform a Full
Channel Test. This establishes a call on each of the
channels until all channels are active. The channels are
then cleared down in the same order as they were
established.
To display the FULL CHANNEL TEST screen:
From the AUTO TEST menu, select FULL CHANNEL
TEST.

Setting up the Full Channel test

•
To set up each of the remaining test options, highlight it
and use the LEFT and RIGHT arrow keys to toggle
between the available choices.
SERVICE
10 - 24
Enter the number of the TE you wish to dial. The
recommended number is your aurora
number or a device such as another aurora
capable of handling multiple incoming calls. Note
that if you choose your own aurora
then only half of the channels will be tested.
To use a number from the CPN directory, highlight
RECALL and press SELECT.
Allows you to choose the type of service
to be tested. You can choose between
DATA 64K and SPEECH CALL.
's own
Duet
that is
Duet
's number
Duet
428856