Table of Contents
Advertisement
LAYER 2 screen
Issue 2 - 05/00
When you have selected S
PS2
INTERFACE and NT mode, this lets
GENERATION
you switch PS2 (power source 2) ON
and OFF. The charger must be
connected to supply NT power.
When aurora
power sources are automatically set
back to OFF. For more information on
power sources, see Chapter 2.
The table below shows the possible power combinations
for each selected interface type and mode.
This screen is used to define various ISDN Layer 2
settings.
•
In BRI mode, you can set up Layer 2 to be either
Permanent or Automatic, and the Terminal
Endpoint Identifiers (TEI) to be either automatic or
fixed. See below for more information. If you set
TEI to Fixed, you can enter up to two fixed B
channel TEI values.
•
In PRI mode, Layer 2 is always permanent and TEI
is always fixed.
Protocol-Specific Setup Functions
is switched off, the
Duet
8 - 7
Hide quick links:
Advertisement
Chapters
Table of Contents
