Switching Between Basic And Primary Rate; Using The Menu - Agilent Technologies aurora Duet User Manual

Switching between Basic and Primary Rate

Using the menu

Issue 2 - 05/00
To use Hot Keys, follow these steps:
• Choose a protocol from the EMULATION menu
(accessed via the SETUP/ISDN SETUP menus) .
• Press F6—EXIT until you return to the MAIN menu.
• From the MAIN menu, press the F4—HOT function
key.
• aurora displays a list of Hot Keys and the settings
Duet
associated with them.
• Designate a configuration by pressing its number on
the keypad or moving the cursor pad to highlight
your selection and then pressing the SELECT key.
• aurora aurora
Duet
you have chosen - this may take a few moments,
then displays the MAIN menu .
You will find a full description of the Hot Keys and how
they work in Chapter 5.
If Primary Rate (PRI) mode is fitted on your aurora
you can switch between the Basic Rate (BRI) and Primary
Rate (PRI) modes of operation either by using menu
selections or by using a Hot Key.
• First, choose the ISDN SETUP option from the main
SETUP menu.
• Choose the EMULATION option. This displays the
EMULATION menu.
The example screen below shows the EMULATION screen
for PRI mode. For a full description of this screen, see
Chapter 8.
reconfigures itself to the settings
Duet
Getting Started
,
Duet
4 - 15