Table of Contents
Advertisement
DECODE TO COMMS
SIMPLE TO COMMS
TEST TO COMMS
RESULTS TO COMMS
Issue 2 - 05/00
Setting Up aurora
Partial decode of layer 2 and
layer 3 signaling with a full
hexadecimal dump of D-channel
messages, Tx/Rx indicator,
timestamp and frame reference
number.
Real-time output of data,
containing a simple decode of
message type, direction and
timestamp.
This option is for use by Agilent
Technologies only. Its use
cannot be guaranteed.
An OSI protocol decode
showing the messages sent
between each layer in the
protocol stack, and D-channel
messages being transmitted and
received by the Data Link layer.
The layers are shown as follows:
User Interface
MMI
Call Control
CC
Layer 3 (Network layer)
L3
Layer 2 (Data Link
L2
layer)
HDLC controller
L2D
Layer 1 (Physical layer)
L1
Management Entity
ME
This may be either the output
generated from a BER test or an
autoservice test. Choose BERT
to turn on the BERT results
output from the RS232 port.
Duet
5 - 17
Hide quick links:
Advertisement
Chapters
Table of Contents
