Agilent Technologies aurora Duet User Manual page 152

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
EMULATION screen
This screen is used to set the emulation mode of your
aurora
To display the EMULATION screen:
In the ISDN SETUP menu, select EMULATION.
Note:
When making your selections, if you work from the top downwards,
aurora automatically shows only the options which are valid with the
Duet
previous selections.
Setting up the emulation mode
To define each of the following settings, highlight it and
use the LEFT and RIGHT arrow keys to switch between
the available choices.
PROTOCOL
ACCESS_TYPE
8 - 4
.
Duet
Sets the protocol to be used. You can
choose between AT&T, Nortel and NI.
Switches between the Basic Rate (BRI)
and Primary Rate (PRI) modes of
operation, if PRI mode is fitted.
If you select PRI mode, the
INTERFACE, CALL APP and LINE
TYPE settings are not available.
428856