AUTO TEST menu
Starting a test
Issue 2 - 05/00
This lets you select from a range of automatic tests.
To display the AUTO TEST menu:
From the MAIN menu, select AUTO TEST.
To select one of the tests, move the cursor to highlight it
and press SELECT.
SERVICE TEST
OUTGOING CHANNEL TEST Checks that outgoing calls
Calls and Testing for the Protocols
Displays the SERVICE
TEST screen, on which you
can enter a CPN and
initiate an automatic test
that uses all of the bearer
capabilities for the current
protocol, in turn, to check
which services the link is
configured to carry.
can be established on each
of the B channels in turn.
You can also run a BER
test on data calls.
10 - 17