Aurora Duet Speech Call Function - Agilent Technologies aurora Duet User Manual

Duet
aurora speech call function
Issue 2 - 05/00
• Switch power on by pushing the ON/OFF switch
briefly in an upwards direction. aurora
a self test which you can skip by pressing the F1
key. The logo screen is then displayed. To skip
further tests, press the SELECT key. The MAIN
menu is displayed.
If there is no response or aurora
automatically, there may be insufficient power. For
detailed information about the power sources for
aurora , see Chapter 2.
Duet
• In the MAIN menu, choose SETUP to display the
MAIN SETUP menu.
• Choose GENERAL SETUP to display the GENERAL
SETUP menu.
• Choose REAL TIME CLOCK to display the REAL
TIME CLOCK screen.
• Verify the date and time displayed. You can change
them if you wish.
• Press F6—EXIT. aurora
and time settings and returns to the GENERAL
SETUP sub-menu.
• Press F6—EXIT. aurora
SETUP menu.
• Press F6—EXIT again to return to the MAIN menu.
You can use this procedure to verify the speech call
functions of your aurora
• Connect the S Bus connector of aurora
Network Termination of an ISDN circuit, using the
cable supplied. There must be no other network
cable connections to aurora
• In the MAIN menu, choose ISDN CALL SETUP.
aurora displays the CALL SETUP menu. The
Duet
details of this screen will depend on the protocol in
use.
Getting Started
Duet
powers off
Duet
Duet saves the displayed date
Duet returns to the MAIN
Duet .
Duet
.
Duet
performs
to the
4 - 19