Information Displayed; Main Setup Menu - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide

Information displayed

•
•
•
•
•
•
•
Display
NORMAL
SECONDARY OUT
PRIMARY OUT
DYING GASP
•

MAIN SETUP menu

This menu allows you to access screens and sub-menus
through which you can set up a variety of general and
BER test parameters.
To display the MAIN SETUP menu:
•
5 - 10
EOC Tx. The last EOC message sent.
EOC Rx. The last EOC message received.
NEBE. Total count of Near End Block Errors
(NEBE).
FEBE. Total count of Far End Block Errors (FEBE).
NEBE ERR SEC. Near End Block Errored seconds.
FEBE ERR SEC. Far End Block Errored seconds.
POWER STATUS. The power status of the NT:
Primary and secondary power supplies are both
normal.
Primary power is normal; secondary power is
marginal, unavailable or not provided.
Primary power is marginal or unavailable; secondary
power is normal.
Both primary and secondary power are marginal or
unavailable. The NT may cease normal operation.
NT TEST MODE. When ON is displayed the NT is
in test mode, initiated from the customer's side.
Otherwise this setting is OFF.
In the MAIN menu (SIMULATE mode) or the
MONITOR menu (MONITOR mode), select SETUP.
Meaning
428856