Agilent Technologies aurora Duet User Manual page 158

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
SCREENING screen
When screening is enabled, you can set up aurora
accept only those incoming calls which have a specific
Calling Line Identifier (CLID), Calling Party Number/
Multiple Subscriber Number (CPN/MSN) or Call
Appearance identifier (CA).
This screen is used to enable screening of incoming calls,
set the type of screening that is to be used and the
numbers that are to be screened.
To display the SCREENING screen:
In the ISDN SETUP menu, select SCREENING.
Choosing the type of screening
When you first enter the screen, screening is set to OFF.
To change the screening type, check the current screening
numbers or enter a new number, highlight MODE and use
the RIGHT and LEFT arrow keys to switch between the
available options: OFF, CPN SCREEN, CLID SCREEN and
CA SCREEN.
8 - 10
to
Duet
428856