Agilent Technologies aurora Duet User Manual page 174

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
Entering the SPID
Storing commonly used SPIDs
Sending the SPID to the network
Function keys
9 - 8
The screen displays the SPID values, if they are present.
At the foot of the screen, aurora
messages from the network to indicate whether the SPID
has been ACCEPTED, REJECTED or NOT SENT.
• Press the DOWN arrow key to highlight the
required SPID.
• Use the keypad to enter a SPID of up to 16 digits. A
flashing cursor appears at the point of entry for the
next digit.
You can use the LEFT arrow key to backspace and
delete the previous digit. To clear the whole SPID,
press F2—CLR.
• Press F6—EXIT to save the SPID as displayed and
return to the DIAL SETUP menu.
• Highlight SPID DIRECTORY and press SELECT.
aurora displays the SPID DIRECTORY screen,
Duet
which is described later in this chapter.
• To send SPID 1 to the network, press F3—SND1.
• To send SPID 2 to the network, press F4—SND2.
F2 Erases the currently highlighted SPID.
CLR
F3 Sends SPID 1 to the network. This is
SND1
only available when you have accessed
the SPID ENTRY screen from the MAIN
menu.
displays status
Duet
428856