Starting The Test; Function Keys - Agilent Technologies aurora Duet User Manual

Issue 2 - 05/00
When SERVICE is set to DATA 64K, you
AUTO BERT
can set aurora
call connection. Choose ON or OFF.
When a SPEECH service test is requested,
AUTO BERT is not available. This is
indicated by a hyphen (-).
FULL RESULTS Displays the results of the last Full
Channel test.

Starting the test

Choose START TEST. The screen below shows a typical
channel display for Primary Rate.
On completion of a DATA service test, aurora
a BERT if AUTO BERT is set to ON. The test procedure
and results are the same as for the OUTGOING TEST.

Function keys

The function keys for the FULL CHANNEL test screen are
the same as for the SERVICE test described earlier in this
chapter.
Calls and Testing for the Protocols
to perform BERT after
Duet
Duet
performs
10 - 25