LINE CODE
RX SENS
T1 SETUP screen
This screen allows you to specify the setup of the Physical
Layer T1 interface for monitoring.
To display the T1 SETUP screen:
In the MAIN SETUP menu for MONITOR mode, select
T1 SETUP.
Setting up the T1 interface
To define each setting, move the cursor to highlight it on
the screen and use the LEFT and RIGHT arrow keys to
switch between the available options.
TERMINATION
LINE CODE
Issue 2 - 05/00
Setting Up aurora
Sets the line code type. You can
choose between B8ZS, AMI and
AUTO.
Sets the T1 receiver sensitivity. You
can choose between STANDARD
and INCREASED.
Sets the T1 termination type. You
can choose between BRIDGE and
DSX MON.
Sets the line code type. You can
choose between B8ZS, AMI and
AUTO.
Duet
5 - 19