Agilent Technologies aurora Duet User Manual page 144

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
F5
F6
Understanding Decode information
The Decode information is in the form of layer 2 and
layer 3 partial decodes of the D Channel traffic. The
layer 2 decode is displayed first followed by layer 3, if
present, and a hexadecimal dump of the entire message.
The following page shows a typical decode output for the
beginning of the call setup process.
7 - 22
For CALL REF, either press F1—ALL or
type a call reference (you can use the
LEFT arrow to delete any existing
numbers).
Specifies an event number for display.
GO
The GOTO EVENT pop-up box is
displayed.
Key in the event number, using the
LEFT arrow key to delete any existing
values.
Returns to the previous menu.
EXIT
428856