Real Time Filter Setup Screen (Monitor); Setting Up Filters For Data Capture - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
XON/XOFF
REAL TIME FILTER SETUP screen
This screen is used to set up filters to be applied at the
time of data capture.
To display the REAL TIME FILTER SETUP screen:
In the MAIN SETUP menu, select REAL TIME FILTER
SETUP.

Setting up filters for data capture

You can filter the data in the following ways:
LAYER
5 - 14
Allows you to switch the XON/
XOFF asynchronous flow control
protocol ON and OFF.
Note:
When you are using aurora
must choose ON.
Allows you to choose a specific
layer for which data is to be
captured. Highlight LAYER and use
the LEFT and RIGHT arrow keys
to toggle through the available
options.You can choose L1, L2, L3,
L2+L3 or ALL layers.
, you
Expert
428856