Dial Screen - Agilent Technologies aurora Duet User Manual

DIAL screen

Issue 2 - 05/00
This screen allows you to enter a called party number
and initiate dialling. The format of the screen depends
upon the selected bearer capability.
To display the DIAL Screen:
In the CALL SETUP menu, when you select any bearer
capability or service for an outgoing call except DATA
N*64K, the DIAL screen is displayed automatically. If
you choose DATA N*64K, the DIAL screen is displayed
after you set up the channels for the BER test in the
BERT CHANNELS screen.
The example below shows the DIAL screen for a Speech
call.
The selected bearer capability—for example, SPEECH
CALL—is displayed.
Note:
The DIAL screen is similar for all bearer capabilities, with
the following exception:
• If you have selected DATA 384K, which is used for
higher data rate services, such as MPEG VIDEO
data stream, you can select which block of 6 slots of
the frame are to be assigned for the call. To do this,
highlight H0 TYPE on the screen and use the LEFT
Calls and Testing for the Protocols
10 - 7