Service Test Screen; To Set Up The Service Test - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
FULL CHANNEL TEST

SERVICE TEST screen

This lets you enter a CPN and initiate an automatic test
that uses all of the bearer capabilities for the current
protocol, in turn, to determine which services the link is
configured to carry. A call is made on the selected B
channel for each of the bearer capabilities.
Service test results are stored even when aurora
switched off and on again.
To display the SERVICE TEST screen:
From the AUTO TEST menu, select SERVICE TEST.

To set up the service test

TEST TYPE
10 - 18
Establishes a call on each
of the channels until all
channels are active. The
channels are then cleared
down in the same order as
they were established.
Highlight TEST TYPE and use the arrow
keys to toggle between LOCAL and
DISTANT. A DISTANT test checks the
acceptance of calls at all points over the
ISDN network. A LOCAL test checks the
acceptance of calls at the device to which
you are connected—for example, your
local exchange.
is
Duet
428856