User Defined Bert Settings; Function Keys - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide

User defined BERT settings

When you set up the BERT PATTERN and TEST LENGTH
as described above, you can choose USER DEF—User
Defined. This allows you to enter custom values for these
settings instead of choosing one of the predefined values.
•
•

Function keys

F2
F3
5 - 22
When you set PATTERN to USER DEF, Line 11
displays USER PATTERN, followed by the current
user defined pattern.
To enter a new pattern comprising two groups of
two hexadecimal digits (i.e. hex numbers in the
range 00 00 to FF FF), press F3—EDIT. A flashing
cursor appears at the point where you enter the first
digit. Use the keypad to enter digits, and the
function keys to enter characters as follows:
F1 = A, F2 = B, F3= C, F4 = D, F5 = E,
F6 = F.
The LEFT arrow key moves back to the first
character. When you have entered four valid
characters, the display returns to the PATTERN
setting.
When you set TEST LENGTH to USER DEF, Line 12
displays TEST LENGTH, followed by the current
user defined test length.
To enter a new length in the form HH:MM:SS
(hours, minutes and seconds), press F3—EDIT. A
flashing cursor appears at the point where you enter
the first digit. Use the keypad to enter the digits.
The LEFT arrow key moves back to the first digit.
When you have entered six valid digits, the display
returns to the TEST LENGTH setting.
Displays the next BERT SETUP screen
NXT
in the sequence.
Allows you to edit a user defined value.
EDIT
428856