Agilent Technologies aurora Duet User Manual page 128

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
Information displayed
• EOC Tx/Rx. The last EOC messages sent (Tx) and
• NEBE. Total count of Near End Block Errors.
• FEBE. Total count of Far End Block Errors.
• NEBE ERR SEC. Near End Block Errored seconds.
• FEBE ERR SEC. Far End Block Errored seconds.
• QM MODE. The number of times aurora
• ILMT MODE. The number of times aurora
• END TEST. The number of times aurora
• TIMER. A 75 second timer that starts when aurora
• POWER STATUS. The power status of the NT:
•
Function keys
F4
7 - 6
received (Rx).
received a Quiet Mode command.
received an Insertion Loss Measurement Test
command.
received an End Test command.
is put into QM or ILMT mode. When an End Test
command is received, it is reset to zero.
NT TEST MODE. ON indicates that the NT is in test
mode, initiated from the customer's side Otherwise,
the display shows OFF.
Resets all error counters to zero.
CLR
has
Duet
has
Duet
has
Duet
Duet
428856