Issue 2 - 05/00
Options on the BERT CONNECTED screen
To choose one of the available options, highlight it and
press the SELECT key.
CLEAR CALL
CONNECT LOOP
CONNECT CODEC
Function keys
F3
Resets all counters and times
CLR
accumulated.
F4
Injects a single bit error into the
ERR
transmitted data stream.
F5
AUT/OFF Allows you to toggle between starting
and stopping the Auto Error Inject. The
ratio of errors injected depends on the
way you set up the ERROR INSERT
option in the BERT SETUP menu.
Calls and Testing for the Protocols
Stops the BER test, stores the
extended BER test results and
initiates clearing of the call.
When the call is cleared, the
clearing cause is displayed in
lines 12 and 13. Press F6—EXIT
to return to the MAIN menu.
Creates a loop back to the same
B channel. The call status is
displayed as LOOP
CONNECTED to indicate that
the loop is in progress.
Allows you to speak after a BER
test. The call status is displayed
as CODEC CONNECTED,
indicating that the BERT has
been interrupted and you can
now speak.
10 - 13