Choosing A Channel For The Call; Choosing A Spid For The Call (Bri); Choosing A Bearer Capability/Service; Function Keys - Agilent Technologies aurora Duet User Manual

Choosing a channel for the call

Choosing a SPID for the call

Choosing a bearer capability/service

Function keys

Issue 2 - 05/00
Use the F2 (channel selection) key as described in The
main function keys in Chapter 4.
• Use the F5 key to switch between SP1 (SPID 1) and
SP2 (SPID 2).
You will find information on how to set up SPIDs in
Chapter 9.
• Highlight your choice using the cursor and press
SELECT.
aurora displays a DIAL screen from which you make
Duet
outgoing calls using the bearer capability you have
chosen.
Note:
For DATA Nx64K calls, which are used for multi-channel
BERT with protocol, before the DIAL screen aurora
displays a BERT CHANNELS screen for you to select the
channels for BER testing.
F2 Allows you to select the channel on
which the call will be made. For more
information about channel selection, see
the description of F2 in The main
function keys in Chapter 4.
Calls and Testing for the Protocols
Duet
10 - 3