Issue 2 - 05/00
If you choose a DISTANT test, you need
to enter a CPN of up to 20 digits. This is
not required for a LOCAL test.
Note:
For Primary Rate testing, the service test is always
DISTANT.
To start the test
•
Select the test type (BRI only), then select START
TEST. When each test is complete, the SERVICE
RESULTS screen is displayed.
Note:
You can also access service test results by selecting
SERVICE RESULTS in the SERVICE TEST menu.
Service results display
The function keys available from the Service Results
display are:
F2 PRN
Prints the results via a serial port at the
end of the test.
Calls and Testing for the Protocols
10 - 19