Table of Contents
Advertisement
PORT
BAUD RATE
BITS
PARITY
STOP BITS
Issue 2 - 05/00
Setting Up aurora
Allows you to choose either the
SERIAL or PARALLEL
communications port.
The serial port is a standard
asynchronous RS232 port.
The high speed parallel port is
Centronics compatible with 8 data
lines, control and acknowledge
handshake lines and use of the
Centronic 'busy' signal. It operates
at speeds in excess of 128kbps. If
you choose the parallel port, all the
other settings are removed from the
screen.
The rate of data transmission. You
can choose between 1200, 2400,
4800, 9600 and 19.2k. The data
rate will depend on the terminal,
VDU or printer that is currently
connected to the port.
The character length of the port
data. You can choose between 7 or
8 bits, to suit the connected device.
The data is usually ASCII, unless
you are using aurora
Expert
Allows you to add a parity bit to
the transmitted data, if necessary, to
suit the connected device. You can
choose between ODD, EVEN and
NONE.
The number of transmitted stop
bits. You can choose between 1 and
2 stop bits.
Duet
.
5 - 13
Hide quick links:
Advertisement
Chapters
Table of Contents
