Notes On The Service Test - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
F3 CFG
F4
F6

Notes on the service test

•
•
10 - 20
Displays information about the most
recent Service test:
• START TIME—in the format HH:MM.
• START DATE—in the format
MM:DD:YY.
• PROTOCOL—the protocol currently in
use, e.g. NI.
• ACCESS TYPE—BRI or PRI.
• INTERFACE—S or U.
•
MODE—TE, NTor LT.
• LINE TYPE—PP or PMP.
• L2 PROTOCOL—SLAVE or MASTER.
• CHANNEL—one of B1 through to B23.
• TEST TYPE — LOCAL or DISTANT.
Displays the call clear cause code and
CSE
description.
Aborts the test and returns to the
EXIT
SERVICE TEST screen.
If a test fails with an internal call cause code, all
further tests are aborted and indicated as FAIL with
a cause code of 0.
If you press F6 during a test, all further tests are
aborted after the current call has cleared. The
remaining tests indicate that they have failed, with a
cause code of 0. The status line displays SERVICE
TEST STOPPING.
428856