F4-Hot Keys; F5-Spid Selection (Bri); F5-T1 Status (Pri); F6-Exit - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
F4—Hot Keys
When in the MAIN SIMULATE menu the F4—HOT
function key takes you to the HOT KEYS menu, from
which you can reconfigure aurora using a single
Duet
keystroke. See below for an introduction to the Hot
Keys, and Chapter 5 for a detailed description.
F5—SPID Selection
When in the MAIN menu, the F5—SPID function key
accesses the SPID STATUS screen. You can use this screen
to select a Service Profile Identifier (SPID) when making
an outgoing call. For more information, see Chapter 9.
F5—T1 Status
When in the MAIN menu, the F5—T1 function key
accesses the LAYER 1 STATUS screens, which show the
current status of the Layer 1 link for the T1 interface. For
more information, see Chapter 6.
F6—Exit
The F6—EXIT function key usually returns you to the
menu that was previously displayed. The information
entered on the current screen is either saved or canceled
depending on the option selected. For more information,
see the description of the specific options.
Hot Keys
The aurora Hot Keys allow you to quickly change the
Duet
operational configuration of aurora by pressing a
Duet
single numeric key.
Note:
Hot Keys are available in SIMULATE mode only.
4 - 14 428856