Agilent Technologies aurora Duet User Manual page 160

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide
NFAS SETUP screen
When you enable Non Facility Associated Signaling
(NFAS) on aurora
second T1 port, operating in 23B + D and 24B channel
mode.
Both T1 ports can be configured to the ISDN network as
TE or NT interfaces.
To display the NFAS SETUP screen:
In the ISDN SETUP menu, select NFAS SETUP.
To set the NFAS mode, move to NFAS, and use the LEFT
and RIGHT arrow cursor keys to switch between the
available choices.
You can choose between the following NFAS options:
OFF (NFAS disabled), STANDARD (NFAS enabled) and
CUSTOM (NFAS enabled, with the D channel location
defined by you).
8 - 12
, you can make and receive calls on a
Duet
428856