Controls - Agilent Technologies aurora Duet User Manual

Controls

Issue 2 - 05/00
A menu option lets you switch between the internal
handset and the external headset while any voice
call is in progress. In PRI Monitor mode, a function
key is used to switch the headset.
You can adjust the headset volume using the F3 and
F5 keys in specific menus.
• Ringer—This provides an audible ringing tone for
incoming calls. You can adjust the volume of the
ringer from the GENERAL SETUP menu.
• Liquid Crystal Display (LCD)—This backlit screen,
suitable for use in low light conditions, displays all
menus, options, data and status messages. It is also
used to display on-screen HELP information.
Function keys (F1—F6)—Press these keys to activate
particular functions related to the operation you are
currently performing.
Cursor pad UP, DOWN, LEFT and RIGHT—The cursor
pad is marked with arrows in the four possible directions
of cursor movement. To move the cursor a single step,
press and release an arrow; for auto-repeat, hold the
arrow down.
Use the UP and DOWN arrows to move the cursor
between menu options. The option currently selected is
displayed as white text on a black background. At the
top of a menu, another press UP brings the cursor to the
bottom; at the bottom of a menu, another press DOWN
brings the cursor to the top. This does not apply to the
MAIN menu in BRI mode, where a scroll bar is in use.
A Look at aurora Duet
3 - 3