Cross Connections; Establishing A Cross Connection - Agilent Technologies aurora Duet User Manual

Cross connections

Establishing a cross connection

Issue 2 - 05/00
While aurora is in NT mode, you can connect together
Duet
any two B channels that have calls established on them.
This allows equipment connected to the B channels to
communicate.
Note:
The B channels must have established calls before they
can be cross connected.
• Press F2—CH to display the B CHANNEL
SELECTION screen.
On this screen, the currently selected B channel is
highlighted. Its number is also displayed at the top
of the screen in the format CHANNEL:NN.
• To select another B channel, move the cursor to
highlight it. Alternatively, enter the channel number
that you require. You must enter two digits—for
example, for channel 3 you would enter 03.
• When the cursor highlights the required channel,
press F2—CON. An arrow pointing down appears
in the channel box.
Getting Started
4 - 17