Agilent Technologies aurora Duet User Manual page 175

SPID DIRECTORY screen
Adding or changing a stored SPID
Issue 2 - 05/00
F4 Sends SPID 2 to the network. This is
SND2
only available when you have accessed
the SPID ENTRY screen from the MAIN
menu.
F6 Saves the changes and returns to either
EXIT
the DIAL SETUP menu or the MAIN
menu.
This screen allows you to store up to 5 pairs of
commonly used SPIDs.
To display the SPID DIRECTORY screen:
In the SPID ENTRY screen, choose SPID DIRECTORY.
• Use the UP and DOWN arrow keys to highlight a
line to add or change a SPID. A flashing cursor
shows the point at which you can enter a number.
• Use the keypad to enter a SPID of up to 16 digits.
If you make a mistake, use the LEFT arrow key to
delete the character to the left of the cursor. To
delete the entire SPID, press F2—CLR.
• Press the UP or DOWN arrow to store the SPID.
Dial Setup for aurora Duet
9 - 9