Agilent Technologies aurora Duet User Manual page 125

Understanding the Monitor display
The top of the screen shows the channel currently
selected for monitoring, the type of monitor selected and
the real time clock setting.
The Status bar at the foot of the screen indicates the
power source which supplies or generates the power.
PWRSRC1 and PWRSRC2, or OPT PWR and SEAL CR,
are displayed depending on the selected interface, as
follows :
PWRSRC 1 Power Source 1. This is power supplied by
PWRSRC 2 Power Source 2. This is power supplied by
OPT PW
Issue 2- 05/00
Monitor, Capture & Review Functions
the NT to the TE.
supplied on the two S Interface
transmission pairs (Rx pins 4 & 5 and Tx
pins 3 & 6).
the NT to the TE.
supplied over pin 7 (negative voltage) and
pin 8 (positive voltage).
Optional Power. This is power supplied by
the NT to the TE. Power is supplied over
pin 7 (negative voltage) and pin 8 (positive
voltage).
Power is
Power is
7 - 3