Automatic Power-Off; Replacing The Main Battery Pack - Agilent Technologies aurora Duet User Manual

Automatic power-off

Replacing the main battery pack

Issue 2 - 05/00
When operated from batteries, aurora
switch off power automatically when it is not used. To
select an automatic power off option, select AUTO
POWER OFF from the GENERAL SETUP menu and use
the LEFT and RIGHT arrow cursor keys to toggle
between the following:
• Power-off after 1 minute of inactivity (1 MIN)
• Power-off after 5 minutes of inactivity (5 MINS)
• Power-off after 20 minutes of inactivity (20 MINS)
• Continuous operation (no automatic power-off)
(OFF)
Note:
You will find instructions on how to access and use the
GENERAL SETUP menu in Chapter 5 of this manual.
To remove the battery pack from aurora
battery pack release button, remove the cover, and gently
pull the pack out of the main unit.
Note:
You will find a diagram of aurora
location of the battery pack release button, in Chapter 3
of this Guide.
CAUTION CAUTION CAUTION CAUTION CAUTION
Do not use any solvents, abrasives or detergents on the
battery contacts—damage will be caused.
Power Sources
can be set to
Duet
, press the
Duet
, showing the
Duet
2 - 3