To Stop The Loop Test; Connect Bert Screen - Agilent Technologies aurora Duet User Manual

Duet
aurora Basic & Primary Rate ISDN Tester - User Guide

CONNECT BERT screen

6 - 10

To stop the loop test

• Highlight STOP TEST and press SELECT.
The loop is removed from the line and the status line
displays ON HOOK.
This screen is displayed when you choose to run BERT
on the B or D channel. It is the same as the screen
displayed during B channel BERT—see BERT
CONNECTED Screen in Chapter 10.
To display the CONNECT BERT screen:
In the LINE BERT menu, select CONNECT BERT.
Running the BER test
When you select the CONNECT BERT option, the test
begins automatically.
To stop the BER test
• Move the cursor to the STOP TEST option and press
SELECT.
The results of the test are now displayed on the screen.
To store the test results
• While the test is in progress, press F6—EXIT.
aurora stops the test and stores the results. Up to
Duet
30 BERT results can be stored at any one time.
To view the stored results, choose RESULTS from
the MAIN menu. You can view results even after
aurora has been switched off and on again.
Duet
To restart the BER test
• Return to the D CHANNEL BERT menu and select
CONNECT BERT.
428856